Wide drone view of a rail-side brick shop with a partly coated metal roof, wooded ridges in fall color behind
FocusCommercial Roofs Only
About

About Our Altoona Metal Roof Coating Work

Repairs First, Then Coating, On Roofs That Can Carry It

Here is how we go about our Altoona metal roof coating work, from the first roof walk to the last coat on shops, warehouses, and halls.

MethodInspect, Repair, Coat
Gloved hands brushing rust off a metal roof panel beside a fresh band of red primer

How We Approach About Our Altoona Metal Roof Coating Work

Everything about our Altoona metal roof coating work follows one rule: the roof underneath has to be ready. We look at attachment, rust depth, laps, flashings, and wet insulation before naming a product. When a roof needs panels replaced or framing fixed first, we say so plainly and price that work separately from the coating.

  • Commercial buildings only
  • Repairs finished before coating
  • Product chosen from the roof, not a ranking
Plain white pickup towing a trailer of coating drums beside a brick shop with a half-coated metal roof

Want A Second Look At Your Roof Plan?

Call us if you already have a coating proposal and want to talk through the prep it covers.

What Our Inspection Covers

Every roof walk covers the same points, written down so you can compare proposals line by line.

  • Screw rows: loose screws, cracked washers, stripped holes
  • Rust depth at panel ends, laps, and gutters
  • Side laps and end laps, including old sealant
  • Flashings at stacks, vents, fans, and curbs
  • Insulation under stains and drip lines
  • Gutters, downspouts, and low spots that hold water
  • Adhesion of the existing paint or coating
  • Foot traffic routes to rooftop equipment

What We Will Not Do, And What We Do Instead

Some requests come up often. The columns show how we usually answer each one.

  • Usually Fits
  • Sometimes
  • Rarely
RequestWe Do ItWe Do It After RepairsWe Turn It Down
Coat over panels that lost their grip on the purlinsRarelySometimesUsually Fits
Coat over wet insulation to stop a leakRarelyUsually FitsSometimes
Coat a roof with surface rust and tight screwsUsually FitsSometimesRarely
Promise a set number of years for the coatingRarelyRarelyUsually Fits
Coat shingles the maker says not to coatRarelyRarelyUsually Fits

Ask About Our Altoona Metal Roof Coating Work

Get a ballpark range, or call and ask how we would handle the roof on your building.

Call Us(582) 622-2866